Siemens ARCADIS Varic Operator's Manual page 230

Image Processing
Selecting a complete
series explicitly
Selecting more than
one series explicitly
Deselecting images
28
of 78
First select an image of the required series explicitly by clicking on it holding
the Ctrl key down or place the input focus on the image by clicking on it.
Call up Edit > Select Series in the main menu.
– The whole series is now selected explicitly.
Hold the Ctrl key down and click on individual images of the required series.
Call up Edit > Select Series in the main menu.
– Several series are selected completely.
If the explicit selection of images does not contain the set of images you require,
you can deselect individual images or all images.
Place the input focus on an unselected segment manually with the mouse by
clicking on it.
Or
Call up Edit > Deselect All in the main menu.
– All selected images are deselected again.
After that, the standard input focus is set automatically, i.e. the top left segment
is active.
Operator Manual
SPR2-310.620.30.02.02