Selection possibilities
Default input focus
ARCADIS Varic
SPR2-310.620.30.02.02
Selecting images
On the Viewing task card, you can not only view images, but also process and
evaluate them.
There are two different ways of selecting images for processing:
explicitly holding the Ctrl key down (explicitly selected images are shown with
a continuous border)
implicitly by working in the input focus
Working in the input focus
The Input Focus shows the active segment of the image area. It is marked by a
broken line border, i.e. it is selected implicitly.
When you load images onto the Viewing task card, the input focus is in the
default position in the top left segment of the image area.
Image Processing
25
0
0
of 78