Operation Via Ethernet Cable - Siemens ARCADIS Varic Operator's Manual

ARCADIS Varic
SPR2-310.620.30.02.02

Operation via Ethernet cable

In case of operation of the ARCADIS system via Ethernet cable, the WLAN at the
monitor trolley needs to be deactivated prior to switching on the system.
Simultaneous operation via Ethernet cable and WLAN is not possible and should
be avoided by all means.
After inadvertent simultaneous operation or after a change between both
options, the system must be switched off and on again.
Options
0
7
of 24