Siemens ARCADIS Varic Operator's Manual page 310

Documentation
Selecting one or more
images explicitly
Selecting images
explicitly up to the end
of a series
Selecting a complete
series explicitly
Deselecting images
30
of 98
Click into a segment holding the Ctrl key down.
– The segment is marked with a line border.
Click on the image that you want to select explicitly holding the Ctrl key down
or use the input focus.
Select Edit > Select On Succeeding.
– The selected image and all the following images are now selected.
Click on the image of the series that you want to select holding the Ctrl key
down or use the input focus.
Select Edit > Select series.
– The whole series is now selected explicitly.
Hold the Ctrl button pressed.
Click on an explicitly selected image again.
Or
Select Edit > Deselect All.
– All selected images are deselected.
– After that, the default input focus is set automatically, i.e. the top left seg-
ment is the destination of the next action.
Operator Manual
SPR2-310.620.30.02.02