Image Processing
76
of 78
Layout in the References task card
The Ref. Split card lets you determine how to split the image area in the
References task card when the Monitor split button at the C-arm system is
pressed.
Click the Ref. Split card into the foreground.
Select the size of the layout from the selection list.
– Loaded images are displayed in the selected layout size in the References
task card when the Monitor split button is selected on the C-arm system.
You can set the following layout sizes: 4:1, 9:1, 16:1.
The standard setting for the layout size is 4:1.
Operator Manual
SPR2-310.620.30.02.02
0