Mitsubishi Melsec-Q Series User Manual page 600

Appendix 2.6 Universal Model QCPU Upgrade
(1) Function comparisons and supported GX Developer versions
Function
*2
Use of the PC CPU module
( QCPU User's manual
(Multiple CPU System))
Setting whether to use the local devices
*1
per program
Program memory batch transfer status
check function (SM165)-compatible
The multiple CPU high-speed
transmission dedicated instruction-
*2
compatible
( QCPU Programming manual
(Common Instructions))
Display of the amount of battery
consumption ( Section 11.3.1)
*1
Bit device extension
Execution conditioned device test
Sampling trace auto start function
CC-Link IE group cyclic communication
function
( CC-Link IE Controller Network
Reference Manual)
*1
Scan time measurement
Forced ON/OFF of external I/O
*1 *2
Monitoring condition setting
Redundant power supply system
*1 *2
compatible
32-bit indexing with "ZZ" specification
( QCPU Programming manual
(Common Instructions))
*1: For details of the functions, refer to the following.
QnUCPU User's Manual (Function Explanation, Program Fundamentals)
*2: Some models do not support the function. For details, refer to the corresponding reference.
*3: Data of the extended data register (D) and extended link register (W) can be retained in the standard ROM by using the latch data
backup function (Section 6.29) if the serial number (first five digits) of the Universal model QCPU is "10042" or later.
*4: Communication using A-compatible 1E frame is available only via the Ethernet module.
If the module is connected to the Ethernet port built in the CPU, this function is not available.
App - 33
TableApp.11 Function comparisons and supported GX Developer versions
Function version
*1
B
*1
*1 *2
*1
First 5 digits of serial
No.
"09072" or later
"10012" or later
"10042" or later
- : Not related to GX Developer
Supported
GX Developer
-
Version 8.62Q or later
-
Version 8.68W or later