Mitsubishi Melsec-Q Series User Manual page 112

No. Name
*1
12)
RS-232 connector
13) Module fixing holes
14) Module fixing projection
15) Module mounting lever
*1: When a cable is connected to the RS-232 connector at all times, clamp the cable to prevent a poor connection, moving, and
disconnection by unintentional pulling.
The Q6HLD-R2 type RS-232 Connector Disconnection Prevention Holder is available as a clamp for RS-232 connector.
*2: Operate the RUN/STOP/RESET switch with your fingertips.
To prevent the switch from being damaged, do not use any tool such as screw driver.
4 - 48
Table4.11 Part Names
Connector for connecting a peripheral device by RS-232.
Can be connected by RS-232 connection cable (QC30R2).
Hole for the screw used to fix to the base unit. (M3 12 screw)
Projection used to secure the module to the base unit.
Lever used to mount the module to the base unit.
CPU module
RS-232 cable
Fixing screw
Figure 4.23 RS-232 cable fixing processing
Application
Q6HLD-R2