Mitsubishi Melsec-Q Series User Manual page 193

Hide thumbs Also See for Melsec-Q Series:

Table of Contents

(From previous page)

Mount the CPU module onto the main

base unit, so that the Q8BAT

connection cable connected to the

CPU module will not interfere with the

other devices.

Fix the Q8BAT onto the control panel.

(Screws or DIN rail is applicable.)

Attach the connector of Q8BAT

connection cable to the Q8BAT while

confirming the orientation of the

• Clamp the Q8BAT connection cable.

Failure to do so may damage the Q8BAT connection cover, connector, or the cable due to unintentional swinging

and shifting or accidental pulling of the cable.

• Provide 10mm (0.39 inches) or more of the bending radius for the Q8BAT connection cable.

If the bending radius is less than 10mm (0.39 inches), malfunction may occur due to characteristic deterioration

and wire breakage.

• For details of the module mounting position, refer to the following.

Section 10.3.2

• Firmly push the connector all the way.

• When installing the Q8BAT for the Universal model QCPU, use the connection cable with "A" printed.

CHAPTER7 MEMORY CARD AND BATTERY

R (bending radius)

10mm (0.39 inch)

connection cable

Control panel

Show Quick Links

Table of Contents