Mitsubishi Melsec-Q Series User Manual page 162

(2) Slim type main base unit (Q32SB, Q33SB, Q35SB)
No. Name
1) Module connector
2) Module fixing screw hole
3) Base mounting hole
4) DIN rail adapter mounting hole
6 - 7
2)
3)
SG
Figure 6.2 Slim type main base unit (Q32SB, Q33SB, Q35SB)
Table6.11 Part names
Connector for installing the Q series power supply module, CPU module, I/O modules, and
intelligent function module.
To the connectors located in the spare space where these modules are not installed, attach the
supplied connector cover or the blank cover module (QG60) to prevent entry of dirt.
Screw hole for fixing the module to the base unit. Screw size: M3 12
Hole for mounting this base unit onto the panel such as a control panel (for M4 screw)
Hole for mounting DIN rail adapter
1)
4)
Application