Mitsubishi Melsec-Q Series User Manual page 75

Item
Special relay [SM]
Special register [SD]
Function input [FX]
Function output [FY]
Function register [FD]
No. of device tracking words
Link direct device
Intelligent function module device
Latch range
RUN/PAUSE contact
Clock function
Allowable momentary power failure
period
5VDC internal current consumption
H
External dimensions W
D
Weight
*9: For use of CC-Link IE controller network, check the versions of the CPU module and GX Developer. (
Remark
For the general specifications, refer to CHAPTER 3.
CHAPTER4 HARDWARE SPECIFICATIONS OF THE CPU MODULE
Table4.3 Performance specifications
Q02PHCPU Q06PHCPU
2048 points (SM0 to 2047) (The number of device points is fixed.)
2048 points (SD0 to 2047) (The number of device points is fixed.)
16 points (FX0 to F) (The number of device points is fixed.)
16 points (FY0 to F) (The number of device points is fixed.)
5 points (FD0 to 4) (The number of device points is fixed.)
Device for accessing the link device directly.
Exclusively used for CC-Link IE controller network
Specified form: J \X , J
Device for accessing the buffer memory of the intelligent function module directly.
Specified form: U \G
(Latch range can be set up for B, F, V, T, ST, C, D, and W.) (Setting by parameters.)
One contact can be set up in X0 to 1FFF for each of RUN and PAUSE. (Setting by parameters.)
Year, month, date, hour, minute, second, and day of the week
Accuracy: -3.18 to +5.25s(TYP.+2.12s)/d at 0
Accuracy: -3.93 to +5.25s(TYP.+1.90s)/d at 25
Accuracy: -14.69 to +3.53s(TYP.-3.67s)/d at 55
Varies depending on the power supply module.
Process CPU
Q12PHCPU
----
*9
and MELSECNET/H.
\Y , J \W , J \B
L0 to 8191(default)
(Automatic leap year detection)
0.64A
98mm (3.86 inches)
27.4mm (1.08 inches)
89.3mm (3.52 inches)
0.20kg
Q25PHCPU
, J \SW , J \SB
Appendix 2.2)
4 - 11
1
2
3
4
5
6
7
8