Table of Contents
Advertisement
9 PARAMETER LIST
Item
I/O assignment
Type
I/O
Assign-
ment
Model name
Points
Start
Base model name
Power model name
Standard
setting
Extension cable
Points
Switch setting
Error time output
module
H/W error time PLC
operation mode
Detailed
setting
I/O response time
Control PLC
Acknowledge XY assignment
Multiple PLC setting
No. of PLC
Operating mode
Out of group input setting
Out of group output setting
Refresh settings
9 - 6
Table 9.1 Parameter List (continued)
Parameter No.
—
Designates the status of installation of each module of the system.
Designates the type of the installed module.
400
H
Designates the model of the installed module. (Memorandum for
users who do not use the CPU module.)
Designates the number of points of each slot.
Designates the first input and output numbers of each slot.
Designates the model of the used main base unit and extension
base unit. (Memorandum for users who do not use the CPU
module.)
Designates the model of the power supply module installed to the
main and extension base units. (Memorandum for users who do
401
H
not use the CPU module)
Designates the model of the extension cable. (Memorandum for
users who do not use the CPU module)
Designates the number of slots of the main and extension base
units. The number of slots is designated for each base unit.
407
Designates various switches of the intelligent function module.
H
Designates whether the output is cleared or retained upon a
403
H
stopping error of the control PLC.
Designates whether the control PLC continues operation or it is
404
H
stopped upon a hardware error of the intelligent function module.
Designates the response time of the input module, high speed
405
H
input module and I/O mixture module.
Designates the control PLC of the I/O module and intelligent
406
H
function module.
Contents of I/O allocation, MELSECNET/Ethernet setting and CC-
—
Link setting can be checked.
—
Defines settings for establishment of a multiple CPU system.
E00
Designates the number of CPUs used in the multiple CPU system.
H
Designates the operation of the multiple CPU system upon a
stopping error of the PLC No.2 to No.4 CPU modules.
E01
H
The multiple CPU system is stopped if a stopping error occurs to
the PLC No.1 (Fixed)
Designates whether the input status of the input module and
intelligent function module controlled by other PLCs are acquired
E04
or not.
H
Designates whether the output status of the output module
controlled by other PLCs are acquired or not.
Designates the devices and the number of points of data transfer
E002
H
in automatic refresh between CPU modules of the multiple PLC
E003
H
system.
MELSEC-Q
Description
9 - 6
Advertisement
Table of Contents
