Mitsubishi Melsec-Q Series User Manual page 67

Item
*7
Step relay [S]
Index register [Z]
Pointer [P]
Interrupt pointer [I]
Special relay [SM]
Special register [SD]
Function input [FX]
Function output [FY]
Function register [FD]
No. of device tracking words
Link direct device
Intelligent function module device
Latch range
RUN/PAUSE contact
Clock function
Allowable momentary power failure
time
5VDC internal current consumption
H
External dimensions
W
D
Weight
*7: The step relay is the device for the SFC function.
*8: The value includes those of the CPU module and base unit.
*9: The value includes those of the CPU module, base unit, and power supply module.
Remark
For the general specifications, refer to CHAPTER 3.
CHAPTER4 HARDWARE SPECIFICATIONS OF THE CPU MODULE
Table4.1 Performance specifications
Q00JCPU
2048 points (S0 to 127/block) (The number of device points is fixed.)
10 points (Z0 to 9) (The number of device points is fixed.)
300 points (P0 to 299) (The number of device points is fixed.)
128 points (I0 to 127) (The number of device points is fixed.)
The cyclic interval of system interrupt pointers I28 to 31 can be set up by parameters.
(2 to 1000ms, 1ms unit)
Default values I28: 100ms, I29: 40ms, I30: 20ms, I31: 10ms
1024 points (SM0 to 1023) (The number of device points is fixed.)
1024 points (SD0 to 1023) (The number of device points is fixed.)
16 points (FX0 to F) (The number of device points is fixed.)
16 points (FY0 to F) (The number of device points is fixed.)
5 points (FD0 to 4) (The number of device points is fixed.)
Device for accessing the link device directly.
Exclusively used for CC-Link IE controller network and MELSECNET/H.
Specified form: J \X , J
J \SW , J
Device for accessing the buffer memory of the intelligent function module directly.
Specified form: U \G
(Latch range can be set up for B, F, V, T, ST, C, D, and W.) (Setting by parameters.)
One contact can be set up in X0 to 7FF for each of RUN and PAUSE. (Setting by parameters.)
Year, month, date, hour, minute, second and day of the week
(Automatic leap year detection)
Accuracy: -3.2 to +5.27s(TYP.+1.98s)/d at 0
Accuracy: -2.57 to +5.27s(TYP.+2.22s)/d at 25
Accuracy: -11.68 to +3.65s(TYP.-2.64s)/d at 55
20ms or less (100VAC or
more)
*8
0.26A
98mm(3.86 inches)
*9
245mm(9.65 inches)
98mm(3.86 inches)
*9
0.66kg
Basic model QCPU
Q00CPU
----
\Y , J \W , J \B ,
\SB
L0 to 2047 (default)
Varies depending on the power supply module.
0.25A
98mm(3.86 inches)
27.4mm(1.08 inches)
89.3mm(3.52 inches)
0.13kg
1
2
Q01CPU
3
4
5
6
7
8
0.27A
4 - 3