Mitsubishi Melsec-Q Series User Manual page 179

Hide thumbs Also See for Melsec-Q Series:

Table of Contents

When the ATA card is used, the value stored in the special register SD603 differs depending on the manufacturer control

number and CPU module type.

When the CPU module is the Universal model QCPU, the ATA card size is stored in SD603 in units of K bytes.

When the module is not the Universal model QCPU, 8000, 16000, or 32000 is stored in SD603 and the value depends on

the manufacturer control number and CPU module type

Table7.5 When the value stored in SD603 depending on manufacturer control number of the Q2MEM-8MBA

Manufacturer control No. and type of

ATA card type

D " or earlier

F " or later

The manufacturer control number (the third digit from the left) of the ATA card is described in the label on the back of the ATA

card. (Refer to Figure 7.1)

When character string including the manufacturer control number is 4digits, the third digit from the left is the manufacturer

control number, and when it is 3 digits, the manufacturer control number is "B".

Value stored in special register SD603

Other than the Universal model QCPU

Serial No. (first 5

digits) is 09011 or

Figure 7.1 Label on the back of ATA card

CHAPTER7 MEMORY CARD AND BATTERY

Universal model

Serial No. (first 5

digits) is 09012 or

ATA card size

Manufacturer

control number

Show Quick Links

Table of Contents