Mitsubishi Melsec-Q Series User Manual page 601

TableApp.11 Function comparisons and supported GX Developer versions
Function
Extended data register (D) and extended
*1 *2
link register (W)
*1 *2
Serial communication function
CPU module change function with
*1 *2
memory card
Local device setting of the index register
*2
Communication using the A-compatible
*4 *5
1C/1E frame (MC protocol)
Corresponding MELSEC Communication
Protocol Reference Manual)
Socket communication function
( QnUCPU User's Manual
(Communication via Built-in Ethernet
Port))
*1
Module model name read
Module error collection function
*1: For details of the functions, refer to the following.
QnUCPU User's Manual (Function Explanation, Program Fundamentals)
*2: Some models do not support the function. For details, refer to the corresponding reference.
*3: Data of the extended data register (D) and extended link register (W) can be retained in the standard ROM by using the latch data
backup function (Section 6.29) if the serial number (first five digits) of the Universal model QCPU is "10042" or later.
*4: Communication using A-compatible 1E frame is available only via the Ethernet module.
If the module is connected to the Ethernet port built in the CPU, this function is not available.
*5: Communication using the A-compatible 1C frame is available only via any serial communication module.
If the module is connected to the built-in RS-232 interface of the CPU module, this function is not available.
*6: Use GX Works2 of version 1.12N or later.
Function version
*1
B
( Q
*2
*1
First 5 digits of serial
No.
*3
"09042" or later
"10102" or later
"11012" or later
"11043" or later
- : Not related to GX Developer
APPENDICES
Supported
GX Developer
Version 8.70Y or later
Version 8.78G or later
APPEN-
Version 8.82L or later
*6
----
App - 34
1
2
3
App
DIX
6
7
8