Mitsubishi Melsec-Q Series User Manual page 154

No. Name
9) Terminal cover
10) Module fixing screw hole
11) Module mounting lever
*1: Although the POWER LED turns on in red for a moment immediately after the power supply is turned on or off, redundant power supply
modules is not faulty.
●
Q64RP automatically switches the input range 100/200VAC.
Therefore, it is not compatible with the intermediate voltage (133 to 169VAC).
The CPU module may not work normally if the above intermediate voltage is applied.
●
Supply power to redundant power supply modules from separate power sources (a redundant power supply system).
●
Ground the LG and FG terminals to the protective ground conductor.
5 - 35
Protective cover of the terminal block
Screw hole for securing a module to the base unit.
M3 12 screw (user-prepared) (Tightening torque : 0.36 to 0.48N•m)
Used to mount a module on the base unit.
Application