48
Quickstart Description
2.
In the "Communication Parameters" dialog, click the [NEW...] button to
create a new communication channel.
The "Communication Parameters: New Channel" dialog appears.
Figure 41: Communication Parameters, Create communication channel
3.
For an ETHERNET connection, assign a name to the communication
channel you just created in the Name input box (here
"ETHERNETConnection" as an example).
4.
Then select the driver "Tcp/Ip 3S Tcp/Ip driver."
5.
Click [OK] to confirm your entries.
Figure 42: Communication Parameters, New channel
6.
Then double-click on the localhost address field in the Value column in the
"Communication Parameters" dialog for this communication channel.
7.
Enter the IP address of your PLC here (192.168.1.100).
You can leave all other parameters (Port, Motorola byteorder, and the
gateway settings) as they are.
750-880, -881, -882 ETHERNET Programmable Fieldbus
WAGO-I/O-SYSTEM 750
Quickstart Reference
Version 1.0.0