Figure 32: "Configuration" Dialog, Inputs/Outputs Tab, Assign Global Variables - WAGO 750-880 Quickstart Reference

WAGO-I/O-SYSTEM 750
750-880, -881, -882 ETHERNET Programmable Fieldbus
The end module is not specified!
Please note that the 750-600 end module is not specified when configuring the
PLC.
6. Click [OK] to close the "Selected Modules" dialog.
7. Then assign variables to the digital input/output modules in the right
window of the I/O Configurator.

Figure 32: "Configuration" dialog, Inputs/Outputs tab, assign global variables

Quickstart Reference
Version 1.0.0
Quickstart Description 39