62
Quickstart Description
3.3.8.2
Web Visualization
Log out to make changes to the target system settings!
Please note that you have to log out of the WAGO-I/O-PRO software to make
changes to the target system settings. If you are still logged in on your PLC with
the WAGO-I/O-PRO software, then click on the Logout menu item in the
WAGO-I/O-PRO dialog under the Online menu.
1.
If you want to change the target system of your project,
select the Target System Settings on the Resources tab.
Figure 61: Change the target system under: Target System Settings on the Resources tab
The "Target System Settings" dialog appears.
750-880, -881, -882 ETHERNET Programmable Fieldbus
WAGO-I/O-SYSTEM 750
Quickstart Reference
Version 1.0.0