Figure 14: Properties Of Your Lan Network Link - WAGO 750-880 Quickstart Reference

WAGO-I/O-SYSTEM 750
750-880, -881, -882 ETHERNET Programmable Fieldbus
3.2.2.1 Determining the IP address of your PC and changing it if required
The explanation below describes how you can determine the IP address currently
set for your PC and how you can change it if required.
1. To set up an ETHERNET link connect the ETHERNET port of your PC to
one of the two ETHERNET ports of the SPS using the cross-over cable
provided with the system.
2. You can determine the IP address of your PC under:
Start > Settings > Networks > LAN.
Here, right click on the option PROPERTIES for the network you are
currently using (LAN X).
3. Then mark the item "Internet Protocol (TCP/IP)" in the popup list and
confirm by clicking [PROPERTIES].

Figure 14: Properties of your LAN network link

Quickstart Reference
Version 1.0.0
Quickstart Description 27