Figure 62: "Target System Settings" Dialog, Activate Web Visualization - WAGO 750-880 Quickstart Reference

WAGO-I/O-SYSTEM 750
750-880, -881, -882 ETHERNET Programmable Fieldbus
2. Select the Visualization tab in the "Target System Settings" dialog.
3. Activate the Web Visualization function in the Visualization tab.
4. Adjust the resolution of the Web visualization to the resolution of your
monitor in the Display width in pixels and Display height in pixels fields.

Figure 62: "Target System Settings" dialog, Activate web visualization

5. Click [OK] to confirm your selection.
The "Target System Settings" dialog closes.
6. Click the Clean all menu item in the WAGO-I/O-PRO dialog under the
Project menu.
7. Then click the Translate all menu item in Project menu.
8. To load the program including the Web visualization into your PLC, click
on the Login menu item in the WAGO-I/O-PRO dialog under the Online
menu.
9. Then start program execution in the PLC via the menu item Online > Start.
Quickstart Reference
Version 1.0.0
Quickstart Description 63