Figure 46: Communication Parameters, Com Port - WAGO 750-880 Quickstart Reference

WAGO-I/O-SYSTEM 750
750-880, -881, -882 ETHERNET Programmable Fieldbus
8. Then select the driver "Serial (RS-232) 3S Serial RS-232 driver".
9. Click [OK] to confirm your entries.
10. Then double-click on the COM1 address field in the Value column in the
"Communication Parameters" dialog for this communication channel, so
that it is marked in gray.

Figure 46: Communication Parameters, COM port

Press the [↓] or [↑] arrow to increase or decrease the COM port number by
11.
one.
Adjust the COM port previously identified in the Device Manager (in this
example "COM27") in the Communication Parameters accordingly.
You can leave all other parameters (Baudrate, Parity, Stop bits, Motorola
byteorder,
Flow Control) and the gateway settings as they are.
12. Click [OK] to confirm your entries.
Quickstart Reference
Version 1.0.0
Quickstart Description 51