Drawbar Hitch Dh- V - Belarus 1822.3 Operator's Manual

5.4.3 Drawbar hitch DH- V

Figure 5.4.2 – Installation variants scheme of DH- V
Table 5.4 – Basic parameters and coupling dimensions of DH- V
Standard size (configuration)
1 Mounting location
2 Design features
3 Purpose
4 DH yoke dimensions, mm:
) connecting pin diameter
1)
b yoke position
by rear PTO shaft
c) distance between PTO shaft end exten-
sion and connection pin axis
5 Trailing appliance for connection to DH:
) type
b) vertical load in hitch point, kN, not more
than
c) trailing appliance steering angle in hori-
zontal plane, degrees, not less than
d) protective mean type
e) connection point of a protective mean to
the tractor
__________________________________________________________________________________________________
1)
Recommended.
2)
Implement accessories.
ATTENTION: IT IS FORBIDDEN TO PUT DH-3V YOKE TO A POSITION WHERE
ITS BODY OVERHANGS THE DH SUPPORTING BRACKET END FOR MORE THAN 15
!
for the implements driven
https://tractormanualz.com/
DH -3V (yoke)
Rear lifting device
Rotational, height adjustable
For connection and coupling of trailed
implements, including of tractor trailers
equipped with drawbar clevises
Lowermost position as it is shown in
Figure 5.4.2
Rigid, with tractor drawbar clevis
Safety chain (rope)
Lifting device bores
199
2022.3-0000010 OM
40
400
20
±60
2)