Providing Access To The Components For Maintenance Services Of Tractors With Facing Consisting Of Hood Only - Belarus 1822.3 Operator's Manual

1 – mask; 2 – lock; 3 – bracket; 4 – link; 5 – clip; 6 – hood; 7 – clinch; 8 – lock; 9
– cable control handle; 10 – side piece; 11 – support; 12 – detent; 13 – link; 14 – clip; 15 –
support; 16 – clip; 17 – plate; 18 – side piece.
Figure 6.2.1 – Opening and closing of hood and mask, removal of side pieces
6.2.2 Providing access to the components for maintenance services of trac-
tors with facing consisting of hood only.
Before starting maintenance service, it is required to open hood 3 (Figure 6.2.2).
Hood 3 can be opened and fixed in two positions.
To open hood 3 in the first position, it is necessary to do the following:
- open lock 2 by pulling control cable handle 1;
- open hood 3;
- fix it in the open position by means of link 4 in bracket 5;
- ensure that hood 3 is fixed properly in the uplift position.
To open hood 3 in the second position, it is necessary to do the following:
- open lock 2 by pulling control cable handle 1;
- uplift hood 3;
- fix it in the open position by means of link 4 in bracket 5;
- disconnect highlight cable from the engine cable;
- slightly uplift hood 3 to release link 4 from bracket 5;
- set link 4back to its place;
- holding hood 3 by a hand, pull locking mechanism 7 along the tractor longitudinal
axis from the cabin;
- open hood 3 into the second position;
- fix it in an open position by means of link 8 in bracket 9.
To close the hood, it is required to do the following:
- slightly uplift hood 3 to release link 4 or 8 from corresponding bracket 5 or 9
depending on the position hood 3 is opened;
set link 4 or 8 back to its place;
-
lower hood 3 in a lower position until a specific click is heard (lock 2 comes
-
into action).
To get a better access to the master cylinders tanks of hydraulic drives of clutch and
breaks control systems, installed on the tractor cab, it is necessary to open hatch 6.
238
https://tractormanualz.com/
2022.3-0000010 OM