Fuel Tank Valve Control - Belarus 1822.3 Operator's Manual

To change a tilt angle of the reverse motion steering column 3 (figure 2.23.1) lo-
cated on reverse post do the following:
- pull the handle 2 up (figure 2.23.2);
- tilt the reverse motion steering column 1 to a position comfortable for operation,
and releasing the handle 2, swing the steering column smoothly in a longitudinal direction
to reach a secure fixation.
The steering column can be tilted and fixed in seven positions. Herein:
- in five positions from 25° to 45° with a 5° period to operate on reverse;
- in two positions from 10° to 15° position to operate the tractor on forward motion.
1 – steering column for reverse motion; 2 – handle.
Figure 2.23.2 – Changing tilt angle of the steering column for reverse motion
ATTENTION: WITH THE STEERING COLUMN FIXED IN THE EXREME FRONT
WORKING CONDITION SET THE RANGE SHIFTING LEVER AS WELL AS THE GEAR
AND PASS SHIFTING LEVER INTO A NEUTRAL POSITION, START THE ENGINE AND
WITH THE TRACTOR NOT RUNNING MAKE SURE THE STEERING CONTROL OPER-
ATES WELL!

2.24 Fuel tank valve control

Fuel is taken into the engine directly from the tank 3 (figure 2.24.1). The valve is in-
tended to shut fuel delivery from the tank 1 to the tank 3. Figure 2.24.1 shows position of
the valve 2 handle, whereby fuel is not delivered from the tank 1 to the tank 3. To deliver
fuel from the tank 1 to the tank 3 it is required to pull the handle of the valve 2 by 90 .
1 – fuel tank, located under the cab; 2 – valve handle; 3 – lateral fuel tank.
Figure 2.24.1 – Fuel tank control
65
https://tractormanualz.com/
2022.3-0000010 OM