3.23.6 Outside mirrors
For position adjustment of a mirror in horizontal plane it is necessary to loosen a
bolt 1 (figure 3.23.10), move out a tube 2 to a required length and tighten the bolt 1.
Figure 3.23.10 – Mirror position adjustment in horizontal plane
The mirror rotation angle in horizontal plane is adjusted by turning a bracket. Turn-
ing the mirror body, other mirror positions can be achieved (left –right, down-up).
3.23.7 Roof with opening hatch
There are two modifications of the roof:
In the first modification:
- the hatch in a closed position is secured by a detent 1 (figure 3.23.11) of a panel 2;
- the hatch in an opened position is secured by pneumatic lifts 1 (figure 3.23.12).
Figure 3.23.11 – Roof hatch fixation (first modification) in closed position
Figure 3.23.12 – Roof hatch fixation (first modification) in opened position
1 – bolt; 2 – tube
1 – detent; 2 – panel.
1 – pneumatic lift; 2 – hatch.
161
https://tractormanualz.com/
2022.3-0000010 OM