Cab; General Information; Cab Installation - Belarus 1822.3 Operator's Manual

3.23 Cab

3.23.1 General information

The cab of the tractors "BELARUS-1822.3/1822 .3/2022.3/2022 .3" provides comfort-
able working conditions, heat and noise insulation, corresponds to safety and observability re-
quirements.
The cab has the following emergency exits:
- doors – left and right;
- rear screen;
- lateral screen – right and left.
Natural ventilation of the cab is realized through the opening side and rear screens and
through the roof hatch. The cab glass is safety and has a bend form.
ATTENTION: DURING OPERATION AND REPAIR WORKS AVOID CAB GLASS
KNOCKS!

3.23.2 Cab installation

The cab is mounted on tractor frame through vibration isolators 3 (figure 3.23.1). In
case of cab dismantling the following shall be done:
- unlock splint pins 5;
- do nuts 4 off;
- dismount bolts 3;
- take off the cab with a help of a beam-crane with a capacity not lower than 1000
kg and using 3 eye screws M16, which are mounted on upper surface of the roof at places
¨A¨ (figure 3.23.2).
1 – bracket to attach cab to coupling clutch housing; 2 – bolt; 3 – vibration isolator, 4 –
nut; 5 – splint pin; 6 – bracket to attach cab to rear axle shaft body.
Figure 3.23.1 – Cab installation on vibration isolators
Figure 3.23.2 – Places of eye screw installation on the roof
157
https://tractormanualz.com/
2022.3-0000010 OM