Tractor Pedals; Switching Of Ranges, Gears And Passes Of The Gearbox Reduction Unit; General Information - Belarus 1822.3 Operator's Manual

2.12 Tractor pedals

2.12.1 Pressing the pedal 24 (figure 2.1.1) disengages the clutch.
2.12.2 Pressing the pedal 26 (figure 2.1.1) brakes the rear left wheel.
2.12.3 Pressing the pedal 27 (figure 2.1.1) brakes the rear right wheel. A joint plate
of the brake pedals is intended for simultaneous braking with the right and left brakes.
2.12.4 Pressing the pedal 28 (figure 2.1.1) increases the engine speed.

2.13 Switching of ranges, gears and passes of the gearbox reduction unit

2.13.1 General information

1 – lever to switch ranges of gearbox; 2 – lever to switch gears and passes of the gear-
box reduction unit; 3 – diagram of switching gears and passes of the gearbox reduction unit; 4
– diagram of switching gearbox ranges; 5 – button to engage the lower (L) pass of the gearbox
reduction unit; 6 – button to engage the higher (H) pass of the gearbox reduction unit; 7 –
annunciator of the lower pass of the gearbox reduction unit (green color); 8 – annunciator
of the higher pass of the gearbox reduction unit (red color).
The required gear is set by means of the lever, shifting gears and passes of the
gearbox reduction unit 2 (figure 2.13.1) as per the scheme 3.
The required range is set by means of the range shifting lever 1 as per the scheme
4.
Pressing the button 5 or 6 on the handle for shifting gears and passes of the reduc-
tion unit 2 engages the lower or the upper pass of the gearbox reduction unit, respectively.
The annunciators 7 and 8 perform indication of the engaged pass of the reduction unit.
Engaging of passes "L" and "H" of the reduction unit is possible only when the gear
shifting lever 2 is set into "neutral" position.
Figure 2.13.1 – Gearbox control
38
https://tractormanualz.com/
2022.3-0000010 OM