Drawbar Hitch Dh -1 - Belarus 1822.3 Operator's Manual

5.4.6 Drawbar hitch DH -1

Table 5.7 – Basic parameters
Standard size (configuration)
1 Mounting location
2 Design features
3 Purpose
4 Distance between PTO shaft end extension
and connection pin axis, mm
5 Diameter of crossbar holes for connecting
pin, mm
6 Vertical load on DH in hitch point, kN, not
more than
7 Protective mean type
8 Connection point of a protective mean to the
tractor
__________________________________________________________________________________________________________
1)
Implement accessory.
Figure 5.4.5 – Installation scheme of DH -1
202
https://tractormanualz.com/
2022.3-0000010 OM
coupling dimensions of DH -1
DH -1 (crossbar)
On a suspension axis of rear lift link-
age
Draw crossbar on suspension axis of
rear lift linkage
For connection and coupling of
trailed, semitrailed and semimounted
implements, equipped with towing
yokes
668
32,5
3,5
Safety chain (rope)
Lifting device bore
1)