3.15 Hydraulic lift linkage (HLL)
3.15.1 General information
The hydraulic lift linkage ensures operation of the linkage and hydraulic working
units of agricultural implements coupled with the tractor. It provides a possibility of using
depth, draft, position or combined means for adjusting running depth of agricultural ma-
chines and implements. The rear lift linkage is operated by a regulator with electromag-
netic control, that ensures draft, position, combined means of control when operating with
mounted and semi-mounted implements.
The hydraulic lift linkage shown includes the following main components:
o a welded oil tank 2 (figure 3.15.1) with a filler neck 1, mounted on the upper sur-
face of the coupling body;
o arms 4, controlling spools of the sections of the "BOSCH" integrated unit 5;
o a gear-type oil pump 14 with a drive 15, proving 1890 rpm of the pump at rated
speed of the engine, it is mounted on the left of the coupling body;
o high pressure hose 12;
o drain oil filter 10 with a free drain clutch 9 (free drain is provided to meet the re-
quirement of coupling the agricultural machines that have a hydraulic drive for working unit
constant operation (hydraulic motor), for example seeders);
o low-pressure pipelines 7, 8, 11.
Drainage from the RLL hydraulic cylinder rod end is provided to prevent environ-
mental discharge of oil.
Note – A hydraulic unit
unit.
1 – filler neck of HLL tank; 2 – HLL oil tank; 3 – oil level gage; 4 – arms to control HLL valve group
sections; 5 – valve group ("BOSCH" integrated unit); 6 – pressure pipe; 7, 8,11 – low-pressure oil
pipelines; 9 – free-drain clutch; 10 – drain oil filter; 12 – high-pressure delivery hose; 13– oil pipe-
line for hydraulic cylinder drain; 14 – HLL oil pump; 15 – oil pump drive; 16 – oil tank breather.
Figure 3.15.1 – Location of lift linkage components on the tractor
70-1523.1 may be installed instead of "BOSCH" integrated
134
https://tractormanualz.com/
2022.3-0000010 OM