Marking Of Tractor Components - Belarus 1822.3 Operator's Manual

3.24 Marking of tractor components

3.24.1 Engine marking
The nameplate of the engine attached to the cylinder block contains the following
data:
- name of the manufacturing plant and its brandname;
- make (model) of the engine;
- serial number of the engine;
- inscription "Made in Belarus" (in English).
The cylinder block contains the engine serial number, which is identical to the num-
ber, specified in the nameplate, and engine configuration in accordance with specs. En-
gines that are given national certificates of conformity of the Republic of Belarus or CIS
countries, has conformity signs from national certification systems of the countries, that
issue this certificate. The conformity certificates are located near the nameplate or above
it.
3.24.2 Cab number
A metal plate with cab designation and cab number is attached to the cab rear wall
at its right, under the name plate with tractor number, as shown in figure 3.24.1.
3.24.3 Front driving axle number
The FDA number is stamped on a pad at the back of the FDA beam as shown in figure
3.24.2.
Figure 3.23.1 – Location of cab marking plate
Figure 3.24.2 – Location of FDA number
https://tractormanualz.com/
163
2022.3-0000010 OM