Ethercat Slave Parameter Settings - Omron Sysmac NJ Series User Manual

5 Setting Up EtherCAT Communications with the Sysmac Studio
5-5

EtherCAT Slave Parameter Settings

1
Double-click EtherCAT under Configurations and Setup on the Multiview Explorer. Or, right-
click EtherCAT under Configurations and Setup and select Edit.
2
Select an EtherCAT slave that is displayed in the EtherCAT Tab Page.
• For NJ-series CPU Units
• For NX-series CPU Units
5-20
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)