Omron Sysmac NJ Series User Manual page 66

2 Part Names and Slave Settings
Sysmac device feature
Saving node address
settings
Verifying the EtherCAT
network configuration
*1. Errors are notified with emergency messages.
*2. EtherCAT slaves for which data can be backed up have specific precautions. Refer to EtherCAT Slaves for
Which You Can Back Up Data in the NJ/NX-series CPU Unit Software User's Manual (Cat. No. W501) for
details on the precautions.
*3. You cannot specify data to back up and restore.
*4. Available backup and restore functions depend on the EtherCAT master from another manufacturer that you
use.
*5. The node address setting method depends on the EtherCAT master from another manufacturer that you
use.
*6. Whether the serial number can be checked or not depends on the EtherCAT master from another manufac-
turer that you use.
OMRON Slaves That Do Not Support Sysmac Devices
Sysmac device feature
Troubleshooting
Backing up and restor-
ing parameters
Saving node address
settings
Verifying the EtherCAT
network configuration
*1. Errors are notified with emergency messages.
*2. EtherCAT slaves for which data can be backed up have specific precautions. Refer to EtherCAT Slaves for
Which You Can Back Up Data in the NJ/NX-series CPU Unit Software User's Manual (Cat. No. W501) for
details on the precautions.
*3. You cannot specify data to back up and restore.
*4. Available backup and restore functions depend on the EtherCAT master from another manufacturer that you
use.
*5. Setting is possible on the node address switches. Node addresses set with the software cannot be stored in
the slave.
*6. The node address setting method depends on the EtherCAT master from another manufacturer that you
use.
2-16
OMRON EtherCAT master
NJ/NX-series CPU Unit
NX701-££££
NX102-££££ CJ-series Position Con-
NX1P2-£££££££
NJ501-££££
NJ301-££££
NJ101-££££
Supported.
Supported.
OMRON EtherCAT master
NJ/NX-series CPU Unit
NX701-££££
NX102-££££ CJ-series Position Con-
NX1P2-£££££££
NJ501-££££
NJ301-££££
NJ101-££££
*1
Not supported.
*2
Supported.
*5
Partially supported.
Not supported.
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
EtherCAT master from
another manufacturer
trol Unit
CJ1W-NC£8£
Supported.
Not supported.
EtherCAT master from
another manufacturer
trol Unit
CJ1W-NC£8£
*1
Not supported.
*3
Partially supported.
*5
Partially supported.
Not supported.
*5
Partially supported.
*6
Partially supported.
*1
Not supported.
*4
Partially supported.
*6
Partially supported.
*7
Partially supported.