Omron Sysmac NJ Series User Manual page 102

5 Setting Up EtherCAT Communications with the Sysmac Studio
3
Select a slave in the Toolbox, drag it to the EtherCAT Tab Page, and drop it to the master.
The slave will be added under the master.
4
Select another slave in the Toolbox, drag it to the EtherCAT Tab Page, and drop it under the
slave to which you want to connect it to.
The slave will be added under the slave.
5-4
EtherCAT Tab Page
Toolbox
Drag the slaves.
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)