The configuration in the Actual network configuration is duplicated in the Network
configuration on Sysmac Studio, and the Comparison results Column shows that every-
thing in the configurations matches. (The network configuration on the Sysmac Studio is creat-
ed based on the actual network configuration.)
5
Click the Close Button.
6
Go offline, and then assign device variables, set the axis parameters, set up the tasks, and set
the master and slave parameters.
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
5 Setting Up EtherCAT Communications with the Sysmac Studio
5
5-41