5 Setting Up EtherCAT Communications with the Sysmac Studio
5-4
EtherCAT Master Parameter Settings
1
Double-click EtherCAT under Configurations and Setup on the Multiview Explorer. Or, right-
click EtherCAT under Configurations and Setup and select Edit.
2
Select the EtherCAT master that is displayed in the Edit Pane.
• For NJ-series CPU Units
• For NX-series CPU Units
The above screen is for NX102 CPU Units.
5-14
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)