When An Analog Output Value Is Not Held; Checking The Q62Da-Fg Status Using Gx Developer System Monitor - Mitsubishi Electric MELSEC Q Series User Manual

8 TROUBLESHOOTING

8.2.5 When an analog output value is not held

8.2.6 Checking the Q62DA-FG status using GX Developer system monitor

8 - 5
Check item
Is the HOLD/CLEAR setting correct?
Is the Q62DA-FG used on a
MELSECNET/H remote I/O station?
When the Q62DA-FG detail information is selected in GX Developer system monitor,
function version, Error code, LED on status and status of the intelligent function
module switch setting can be checked.
(1) Operating the GX Developer
[Diagnostics]
Module's Detailed Information
(2) Module Detailed Information
(a) Checking the function version
The function version of the Q62DA-FG is displayed in the product
information field.
(b) Checking Error code
Error code stored in buffer memory address 19 (Un\G19) of the Q62DA-FG
is displayed in the Present Error field.
(When the
Present Error field are displayed in the No.1 field.)
Check the Switch 3 setting of the intelligent function
module switch setting on GX Developer.
Take corrective actions, referring to POINT in Section
3.2.1.
[System monitor] "Select Q62DA-FG"
Error History button is pressed, the contents displayed in the
MELSEC-Q
Action to be taken
Function version
8 - 5