7
ONLINE MODULE CHANGE
7.1 Online Module Change Conditions
The CPU, MELSECNET/H remote I/O module, Q62DA-FG, GX Developer and base
unit given below are needed to perform Online module change.
(1) CPU
(2) MELSECNET/H remote I/O module
(3) Q62DA-FG
(4) GX Developer
(5) Base unit
7 - 2
The Process CPU or Redundant CPU is required.
For precautions for multiple CPU system configuration, refer to the QCPU User's
Manual (Multiple CPU System).
For precautions for redundant system configuration, refer to the QnPRHCPU
User's Manual (Redundant system).
The module of function version D or later is necessary.
The module of function version C or later is necessary.
GX Developer of Version 7.10L or later is necessary.
GX Developer of Version 8.18U or later is required to perform Online module
change on the remote I/O station.
1) When the slim type main base unit (Q3 SB) is used, Online module change
cannot be performed.
2) When the power supply module unnecessary type extension base unit (Q5
B) is used, Online module change cannot be performed for the modules on all
the base units connected.
MELSEC-Q
7
7 - 2