5
UTILITY PACKAGE (GX Configurator-DA)
5.6.3 Confirmation of Conversion Characteristic
5 - 23
[Purpose]
The converted value of digital-analog conversion can be confirmed according to
the tilt of the graph, based on the offset/gain setting.
[Operating procedure]
Monitor/test screen
[Setting screen]
[Explanation of items]
(1)
Items
I/O characteristic diagram: Displays the I/O conversion characteristic to the
prepared offset/gain setting.
(2)
Setting details
Analog/Range setting
Analog:
Range setting: Select either "User range setting 2" or "User range setting
Offset/Gain setting
Offset value:
Gain value:
Offset/gain setting
Select the output (voltage/current) when a digital value is
converted to an analog value.
3. " However, if "Current" is selected for the "Analog" item,
only "User range setting 1" can be selected.
Enter an offset value to display the I/O characteristic
diagram.
Enter a gain value to display the I/O characteristic diagram.
MELSEC-Q
Conversion characteristic
5 - 23