7
ONLINE MODULE CHANGE
7 - 32
(4) Operation check
(a)
To make an operation check, click the [Cancel] button to cancel control
resumption.
(b)
Click the [OK] button to stop the "Online module change" mode.
(c)
Click the [Close] button to close the System monitor screen.
(d)
Choose [Online] - [Debug] - [Device test] on GX Developer and set the
values prerecorded in Section (2) to the buffer memory.
(e)
Turn User range writing request (YA) from off to on to restore User set
values to the module.
After confirming that Offset/gain setting mode flag (XA) is on, turn off User
range writing request (YA).
MELSEC-Q
7 - 32