Mitsubishi Electric MELSEC Q Series User Manual page 66

4 SETUP AND PROCEDURES BEFORE OPERATION
4.2 Setup and Procedures before Operation
4
4 - 2
Start
Module mounting
Mount the Q62DA-FG in the specified slot.
Wiring
Wire external devices to the Q62DA-FG.
Intelligent functional module switch settings
Perform settings using GX Developer
(Refer to Section 4.5).
Use user range settings?
Use user range settings
Offset/gain setting
If user range settings are used, perform the
offset and gain settings (Refer to Section 4.6).
Use the utility package?
YES
Initial setting and automatic refresh setting
The program can be simplified if the utility
package is used for setting (Refer to Chapter 5).
Programming and debugging
Create and check the sequence program.
Use the industrial shipment
setting output range.
NO
MELSEC-Q
4 - 2