Mitsubishi Electric MELSEC Q Series User Manual page 42

3 SPECIFICATIONS
1) The expectable analog output value is greater than 2mA.
2) The expectable analog output value is within the range of 0.5 to 2mA. : Q62DA-FG sets the disconnection
3) The expectable analog output value is less than 0.5mA.
3 - 16
(c) Auto setting
As shown from 1) to 3), the Q62DA-FG automatically changes the
disconnection detection values according to the expectable analog output
values.
3) 2)
0.5mA
-3000 -2625 -1500
Dead band
Output monitor value (mA)
1)
22
20
4
1
0
1 Analog output is an expected value from the digital input value.
The analog output value is not an actual output.
: Q62DA-FG sets the disconnection
: Q62DA-FG regards the range as a
MELSEC-Q
Analog output
Half an analog output value.
Disconnection detection value
12000
13500
detection value to 1mA.
detection value to the half of the
expectable analog output value.
dead band and does not detect the
disconnection.
1
Digital value
3 - 16