Mitsubishi Electric MELSEC Q Series User Manual page 99

5 UTILITY PACKAGE (GX Configurator-DA)
5 - 20
[Explanation of items]
(1) Items
Setting item
Current value
Setting value
(2) Command button
Current value
Make text file
Start monitor /
Stop monitor
Execute test
Close
POINT
(1) Turning the output enable/disable flag on/off or writing CH
during test operation changes the analog output, so perform these after taking
ample safety precautions.
(3) Examples of "Selection test"
The followings explain the case of forcing on CH1 Output enable/disable flag
(Y1).
(a) Click the Operating condition setting
(b) Change the setting value field for "Y01: CH1 Output enable/disable flag" to
"ON: enable."
Nothing is written to the Q62DA-FG at this point.
(c) Click on the field, of which setting value has been changed in step (b).
(When multiple items have been changed in operation (b), select the setting
value fields where setting values were changed, while holding down the
Ctrl key. Multiple fields can also be selected by dragging the mouse
over them.)
(d) Click the
After the writing is completed, the written values are displayed in the
"Current value" field.
: Displays buffer memory names.
: Monitors the present buffer memory values.
: Enter or select values to be written into the buffer memory for
test operation.
Displays the current value of the item selected. (This is used
to check the text that cannot be displayed in the current value
field. However, in this utility package, all items can be
displayed in the display fields).
Creates a file containing the screen data in text file format.
Selects whether or not to monitor current values.
Performs a test on the selected items. To select more than one
item, select them while holding down the
Closes the currently open screen and returns to the previous
screen.
Execute test button to write the data.
MELSEC-Q
Ctrl key.
Digital value
button in the Monitor/Test screen.
5 - 20