Mitsubishi Electric MELSEC Q Series User Manual page 76

4 SETUP AND PROCEDURES BEFORE OPERATION
4 - 12
(2) Program examples
The program in the dotted area of (a) is common to (a), (b) and (c).
In this example, the I/O signals for the Q62DA-FG are X/Y0 to X/YF.
• Channel selection .................................................................................. M0
• Offset/gain range setting ........................................................................ M1
• Offset setting .......................................................................................... M2
• Gain setting ............................................................................................ M3
• Channel change command ................................................................... M4
• Writing the adjustment amount .............................................................. M5
• Analog output value adjust command ................................................... M6
• Offset/gain setting value write command to the module ....................... M7
• Mode switching ....................................................................................... M8
• Normal mode checking signal ................................................................ M50
• Channel designation storage device ...................................................... D0
• Dedicated instruction (G(P).OFFGAN) setting storage device .............. D2
• Offset/gain adjustment storage device ................................................... D1
MELSEC-Q
4 - 12