Mitsubishi Electric MELSEC Q Series User Manual page 19

1 OVERVIEW
(9) Online module change
(10) Offset/gain setting
(11) Easy settings with GX Configurator-DA
1 - 2
Further, the specifications can be handed down to the new Q62DA-FG by the
followings:
• Succession of offset/gain settings to the new Q62DA-FG replaced by Online
module change.
• Transfer of offset/gain setting values to the other Q62DA-FG mounted on the
other slots.
GX Configurator-DA, dedicated instruction (G(P). OFFGAN) or Mode switching
setting allows a shift to the offset/gain setting mode easily.
The number of sequence programs can be reduced since GX Configurator-DA
(sold separately) allows the Q62DA-FG settings on the dialog box.
Also, GX Configurator-DA simplifies checking of the module settings and
operation status.
1
In addition, FB can be automatically created from intelligent function module
parameters set in advance to use them in a sequence program.
1 FB is the function for making a circuit block used in a sequence program
repeatedly a part (FB) to use it in the sequence program.
This function can improve the efficiency of program development and
minimize program bugs to improve program qualities.
For the details of FB, refer to "GX Developer Version 8 Operating Manual
(Function Block)."
MELSEC-Q
1
1 - 2