Mitsubishi Electric MELSEC Q Series User Manual page 21

2 SYSTEM CONFIGURATION
(3) Support of Online module change
(4)
Single CPU system
Q00J/Q00/Q01CPU
Multiple CPU system
Single CPU system
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Multiple CPU system
Single CPU system
Q02PH/Q06PHCPU
Multiple CPU system
Single CPU system
Q12PH/Q25PHCPU
Multiple CPU system
Q12PRH/ Redundant CPU
Q25PRHCPU system
Single CPU system
Q00UJ/Q00U/
Q01UCPU
Multiple CPU system
Q02U/Q03UD/
Single CPU system
Q04UDH/
Multiple CPU system
Q06UDHCPU
Single CPU system
Q10UDH/
Q20UDHCPU
Multiple CPU system
Single CPU system
Q13UDH/
Q26UDHCPU
Multiple CPU system
Q03UDE/Q04UDEH/
Single CPU system
Q06UDEH/Q13UDEH/
Multiple CPU system
Q26UDEHCPU
Single CPU system
Q10UDEH/
Q20UDEHCPU
Multiple CPU system
Single CPU system
CPU modules other
than the above
Multiple CPU system
If installed in a MELSECNET/H remote I/O
station
2 - 2
The function version of the Q62DA-FG has been "C" from the first release,
supporting Online module change.
For details, refer to CHAPTER 7.
Supported software packages
Relation between the system containing the Q62DA-FG and software package is
shown in the following table.
GX Developer or GX Works2 is necessary when using the Q62DA-FG.
GX Developer
Version 7 or later
Version 8 or later
Version 4 or later
Version 6 or later
Version 8.68W or later
Version 7.10L or later
Version 8.45X or later
Version 8.78G or later
Version 8.48A or later
Version 8.78G or later
Version 8.62Q or later
Version 8.68W or later
Version 8.78G or later
Not supported
Version 6 or later
Software Version
GX Configurator-DA
Version 1.14Q or later
Version 1.15R or later
Refer to the GX Works2
Version 1 Operating
Manual (Common).
Version 2.06G or later
Not supported
Version 1.14Q or later
MELSEC-Q
2
GX Works2
2 - 2