Fb Conversion Of Initial Setting/Auto Refresh Setting - Mitsubishi Electric MELSEC Q Series User Manual

5 UTILITY PACKAGE (GX Configurator-DA)

5.7 FB Conversion of Initial Setting/Auto Refresh Setting

5 - 27
[Purpose]
FB is generated automatically from the intelligent function module parameter
(initial setting/auto refresh setting).
[Operating procedure]
Intelligent Function Module Parameter Setting Module Selection Screen
<<FB Support Parameter>> tab
[Setting screen]
[Explanation of items]
(1) Items
Start I/O No.:
The start I/O No. of the information which is set up on the currently open
intelligent function module parameter is displayed.
Module model name:
The module model name of the information which is set up on the
currently open intelligent function module parameter is displayed.
Initial setting:
Set up whether to apply FB conversion to the parameter or not.
Check if you apply FB conversion to the parameter.
Auto refresh:
Set up whether to apply FB conversion to the parameter or not.
Check if you apply FB conversion to the parameter.
FB program name:
Set up the name of the converted FB program.
Up to six single-byte characters can be set up as an FB program name.
However, the characters and terms shown below cannot be set up as FB
program name.
Character: \, /, :, ;, *, ?, ", <, >, |, ,, , .,
Term:
CLOCK$
In addition, I- is added for initial setting and A- is added for auto refresh
setting respectively to the top of the FB name setting to be registered in
GX Developer after FB conversion is performed.
Ex.: If the FB program name is "ABCDE, " the initial setting is "I-ABCDE"
and the auto refresh setting is "A-ABCDE. "
Title: Set up a title on a converted FB program. Up to 32 single-byte characters
can be set up as a title.
(2) Command buttons
Conversion
FB conversion
COM1 to COM9, LPT1 to LPT9, AUX, PRN, CON, NUL,
FB conversion is performed for the checked columns of initial
setting and auto refresh setting.
MELSEC-Q
5 - 27