Mitsubishi Electric MELSEC Q Series User Manual page 173

APPENDICES
Device
CH1 Industrial shipment settings
(S) + 8
offset value (used for monitor output)
CH1 Industrial shipment settings gain
(S) + 9
value (used for monitor output)
CH2 Industrial shipment settings
(S) + 10
offset value (used for monitor output)
CH2 Industrial shipment settings gain
(S) + 11
value (used for monitor output)
CH1 User range settings offset value
(S) + 12
(used for D/A)
CH1 User range settings gain value
(S) + 13
(used for D/A)
CH2 User range settings offset value
(S) + 14
(used for D/A)
CH2 User range settings gain value
(S) + 15
(used for D/A)
CH1 User range settings offset value
(S) + 16
(used for monitor output)
CH1 User range settings gain value
(S) + 17
(used for monitor output)
CH2 User range settings offset value
(S) + 18
(used for monitor output)
CH2 User range settings gain value
(S) + 19
(used for monitor output)
Sequence program
G.OGSTOR instruction
Completion device (D)
Status display device
at completion (D)+1
App - 8
Control data
Item
(1) Functions
(a) Restores the offset/gain values of the user range setting stored in the CPU
to the Q62DA-FG.
(b) There are two types of interlock signals for the G(P).OGSTOR instruction:
the completion device (D) and the status display device at completion (D) +
1.
1) Completion device
Turns on in the END processing of the scan where the G(P).OGSTOR
instruction is completed, and turns off in the next END processing.
2) Status display device at completion
Turns on and off depending on the completion status of the
G(P).OGSTOR instruction.
Normal completion
Abnormal completion: Turns on in the END processing of the scan
END processing END processing
ON
OFF
OFF
OFF
1
(2/2)
Setting data
—
—
—
—
—
—
—
—
—
—
—
—
: Stays off and does not change.
where the G(P).OGSTOR instruction is
completed, and turns off in the next END
processing.
Execution completion of
the G.OGSTOR instruction
MELSEC-Q
Setting range Set by
— System
— System
— System
— System
— System
— System
— System
— System
— System
— System
— System
— System
END processing END processing
ON
ON Abnormal
completion
Normal completion
1 scan
App - 8