How To Order Replacement Parts - Sharp V-1 General & Electrics Manual

SHARP
7.11.5 YEARLY MAINTENANCE
1. Ensure the push buttons and switches on the control panels work properly.
2. Remove all the carbon deposited on the electrical relay points, then clean all the
electrical relay points with alcohol liquid.
3. Check if the balance chains are in good service conditions.
4. Clean up the hydraulic system, including the oil tank, and refill the oil tank. Ensure all
the setting pressure are normal.
5. Check the machine leveling and adjust if necessary.
6. Check all electric wire connections for looseness.
7. Replace oil of the spindle cooler system, if you have this equipment.

7.12 HOW TO ORDER REPLACEMENT PARTS

1. Quote components part number and description, against each part's illustration for all
component parts required.
2. Some parts are standard items, which can generally be purchased locally- e.g. nuts,
bolts, screws, washers, etc.
3. Always quote the machine serial number in all parts orders or technical inquiries.
This number can be found at the nameplate at the machine bed.
V-1 KNEE MILL GENERAL MANUAL
CH7-17 KRDM24C0 V4.0S