SHARP
6.2 ADJUSTMENT OF TABLE GIB
The taper gib " A" is used for adjusting precision of table moving. The screw " B " is used
for setting the gib. When adjust the gib, turn the screw counterclockwise to loose the gib a
littile, then turn the screw clockwise to adjust the gib until the table move smooth and precisely.
6.3 ADJUSTMENT OF SADDLE GIB
The taper gib " A" is used for adjusting precision of saddle moving. The screw " B " is
used for setting the gib. When adjust the gib, turn the screw counterclockwise to loose the gib
a little, then turn the screw clockwise to adjust the gib until the saddle move smooth and
precisely.
V-1 KNEE MILL GENERAL MANUAL
CH6-3
KRDM24C0 V4.0S