Sharp V-1 General & Electrics Manual page 71

SHARP
4.10.3 LUBRICANT FILLING
Remove the oil tank cap and fill the tank with clean lubricant at the level of 80% of the
tank height (Fig. 3). Approved lubricant viscosity range is 30~150 cSt.
NOTE !!!
Viscosity higher than 150 cSt may result the burn down of the lubrication systems.
4.10.4 FUSE ON THE CONTROL BOARD
4.10.4.1 THE SPECIFICATION OF THE FUSE
1. TYPE 350204 glass tube fuse slow blow type 5.2*20.
2. Availabe range For protecting instruments, power supplies, computers, the related
equipment of computers and telephone sets.
3. Shape & Size as following illustrations (Unit mm)
(a) Structure & shape
Body size of fuse
(b) Rated Voltage 250 V AC
(c) Rated Currentl 2A
As shown in above figure.
Dia 5.2 mm * L 20mm.
CH4-22
V-1 KNEE MILL GENERAL MANUAL
KRDM24C0 V4.0S